Concrete pumping for tight access
A line pump reaches where a truck pump cannot. Tight sites, bad access and expensive pours.
We run a line pump, not a truck pump. The concrete goes down a hose along the ground instead of over a boom, so it can go through a gate, around the side of a house, over a fence or into a building where a truck simply cannot reach.
It runs to 100 metres of line, and small pours are welcome. A back garden slab, a shed floor, a set of footings behind the house: the pours that are awkward for a big pump are exactly what this is built for. Got a job coming up with tight access? That is the call to make.
When you need it
The situations we get called for most. If yours is not on the list, ring anyway.
- The truck cannot get near the pour and barrowing it would take all morning.
- The pour is behind the house, up a drive, or inside a building.
- The site is tight or soft, or there is a fence, a gate or new landscaping in the way.
- It is a small pour and you do not want to book something enormous for it.
- Footings, a shed floor, a patio or a path that needs feeding steadily rather than in barrow loads.
- You are pouring and cutting the same slab and would rather deal with one contractor.
The numbers
- Pump type
- Line pump, not a truck pump
- Line reach
- 100 m
- Access
- Through gates, around houses, over fences
- Pour size
- Small pours welcome
- Same crew
- We pump it and we cut it
100 m is what our line pump will push. Reach on the day depends on the mix, the rise and the number of bends, so tell us the site and we will be straight with you.
Have this ready
None of it is compulsory. It is just the difference between one visit and two.
- Photos of the access, or five minutes on site with us beforehand.
- Your concrete booked, with the mix, the volume and the time the truck is coming.
- The boxing done and the steel in, so the pour is not waiting on us and we are not waiting on it.
- Somewhere for wash out, agreed before we start.
- Your placing and finishing crew organised, or tell us and we will talk you through what is needed.
How we do it
The kit is named after what it does. The order matters more than the brand on the side of it.
- Look at the access first, either on site or from a photo you text us, so the line is planned before the truck turns up.
- Park where we are not in anybody's way, run the lines out, and keep the pour moving.
- Pump, then clean out properly. Wash out is agreed before we start, not improvised in your garden.
- Cut the slab when it is ready, if it needs cutting, so it is one contractor rather than two.
- Leave the site clean. Concrete on a driveway sets just as hard as concrete in the boxing.
Jobs like this one
Photographed on site, posted at the time, and shown here because the work speaks plainer than we do.
20 mm decorative cuts in a patio area
A plain outdoor pad turned into a tiled look, cut 20 mm wide to take a darker grout, set out and cut in one visit.
Slot drain network extension on a live factory floor
Cutting, breaking out and rebuilding a slot drain network while the factory kept running, tying into live drains under a fixed handover date.
What we get asked
What is the difference between a line pump and a truck pump?
A truck pump reaches over the top of a site on a boom. A line pump pushes the concrete down a hose along the ground, so it can go through a gate, around a house or into a building where a boom cannot reach. Ours runs to 100 metres of line.
How far can you pump?
Up to 100 metres of line. What is realistic on the day depends on the mix, how far up you are going and how many bends there are, so send us the site and we will tell you what is realistic.
Do you take small pours?
Yes. Small and awkward pours are exactly what a line pump suits, and we would far rather do the small one than turn it away.
Do you place and finish the concrete as well?
We pump it, and we cut it once it is ready. Placing and finishing is a specialist crew's job and we work alongside them rather than pretending otherwise.
Can you pump inside a building or through tight access?
Yes, that is the whole point of a line pump. Through a gate, around the side of a house, over a fence, up a drive or inside a building, as long as there is a path for the line.
How do I find out what it will cost?
Send through the volume, the access and where you are, and Matt will come back to you. The estimate form on this site is the fastest way to get it in front of him.
Timaru out to the Mackenzie
Timaru and Temuka are the two we get asked for most on this one, but the whole list below is a normal week.
- Timaru Our base
- Temuka 15 min from Timaru
- Geraldine 35 min from Timaru
- Ashburton 75 min from Timaru
- Twizel 150 min from Timaru
We also work across Canterbury, North Otago and the Mackenzie. If the job is worth the drive, we will drive it.
Got a pour with tight access?
Send us the volume, the access and where you are and Matt will come back to you. If it is easier, ring or text the number and describe the site.